DisplayPort Accessories

DisplayPort DisplayPort Accessories

By combining a DPextend and a DPadapt module, it is possible to reach cable runs of up to 45m, with no additional power supplies required.

Exploit the power of the ImageDP4 DisplayPort outputs to provide long cable runs and support for legacy DVI monitors.

DPextend

DPextend

The Datapath DPextend module allows the DisplayPort outputs of the Datapath ImageDP4 video graphics card to drive resolutions of up to 2560x1600 x60Hz over 40m into a native DisplayPort monitor.

The DPextend is entirely powered from the ImageDP4 graphics card output connectors, provided that Datapath DisplayPort cables are used. The DPextend also compensates for voltage losses in the cables to allow it to additionally forward power to a DPadapt module for ultimate conversion to DVI.


DPadapt

DPadapt

The Datapath DPadapt module is an active DisplayPort to DVI converter which allows the Datapath ImageDP4 graphics card to drive legacy single-link DVI monitors at up to 165 MP/s.

Unlike other DisplayPort to DVI converters which have short, fixed DisplayPort connections, the DPadapt can accept a long input cable, allowing it to exploit the improved cable driving performance of the DisplayPort signal standard. Using a 20m Datapath DisplayPort cable, and a standard 5m DVI output cable, a 25m run the DVI monitor is possible - all powered over the Datapath cable from the Datapath ImageDP4 video graphics card.

By combining a DPextend and a DPadapt module, it is possible to reach cable runs of up to 45m, with no additional power supplies required.

Key Qualities of the DPextend:

  • Supports all DisplayPort1.1a resolutions up to 2560x1600 (up to 385 MP/s)
  • Connects two DisplayPort cables each up to 20m in length to provide a total cable run of up to 40m
  • Powered from the Datapath ImageDP4 video graphics card*
  • Supports HDCP
  • Full latching DisplayPort connectors

 

Key Qualities of the DPadpt:

  • Active DisplayPort to DVI conversion at up to up to 1920x1200
  • Supports up to 20m DisplayPort input cables
  • Supports single link DVI-D output
  • Powered from the Datapath ImageDP4 video graphics card*
  • Supports HDCP
  • Supports full access to the EDID of the DVI monitor

* Requires Datapath DisplayPort cable with power connection.

Specification of the DPextend DisplayPort Accessory:

DisplayPort Version 1.1a (4 lanes)
Supported Cable Lengths Up to 2 x 20m DisplayPort (40m total)
HDCP Support Yes
Size 50mm x 56mm
Power 0.4W (from cable, no need for external power)
DP Power Indication Green LED on input port

 

Specification of the DPadapt DisplayPort Accessory:

DisplayPort Version 1.1a (4 lanes)
DVI Version 1.0 (single-link) DVI-D
Supported Cable Lengths 20m DisplayPort, 5m DVI (25m total)
(40m DisplayPort when used in combination with the DPextend)
HDCP Support Yes
Size 54mm x 56mm
Power 1.1W (from cable, no need for external power)
DP power indication Green LED on input port

 

We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.

Models Available of the DPextend and DPadapt:

Code Description
DPadapt10 DisplayPort DVI conversion module, plus 10m powered DisplayPort cable
DPadapt15 DisplayPort DVI conversion module, plus 15m powered DisplayPort cable
DPadapt20 DisplayPort DVI conversion module, plus 20m powered DisplayPort cable
DPextend10 DisplayPort signal extender module, plus 10m powered DisplayPort cable
DPextend15 DisplayPort signal extender module, plus 15m powered DisplayPort cable
DPextend20 DisplayPort signal extender module, plus 20m powered DisplayPort cable

 

For the addition connectivity options, we supply the following adapters:

DP-DVI DisplayPort to single-link DVI adapter
Connect ImageDP4 or other DisplayPort sources to DVI. Supports up to 1920 x 1200 / 60fps
DP-VGA DisplayPort to VGA adapter
Connect ImageDP4 or other DisplayPort sources to VGA connections. Supports up to 1920 x 1200 / 60 fps
DP-HDMI DisplayPort to HDMI adapter
Connect ImageDP4 or other DisplayPort output to HDMI monitors. Supports HDMI 1.4

 

Your packing box should contain the following items:

  • A DPextend or DPadapt module.
  • A 10, 15 or 20m powered DisplayPort cable

 

All products are shipped with the latest software available, unless stated otherwise. Special requirements may be organised by contacting our Sales team.

Download, Applications and Drivers:

Where to buy

Datapath has a large network of distributors and resellers across the World.

Datasheets

Download the datasheets for your Datapath products - current and past.

Current & Past Products »

Downloads

Download the latest software for your Datapath products.

Current Downloads »
Legacy Downloads »

Manuals

Download the manual for your Datapath products - current and past.

Current & Past Products »

Website Designed by Brookstone Creative Ltd.