> VisionAV-HD

VisionAV-HDVisionAV-HD

Four lane PCIe lane bus, Net 1.6 GB/s total capture bandwidth

Triple channel PCI Express capture card - 2 x DVI-I, 1 x SD

Direct DMA to graphics memory of third party graphics cards

A capture card with two channels of HD DVI video and an extra composite video input all operating simultaneously and independently; with full analogue and digital audio support.

The VisionAV-HD has three independent video capture inputs - two supporting High Definition capture and a third supporting Standard Definition composite video. This capture card  also adds multiple channels of audio capture, which can be synchronised in software using timestamping with all video capture channels.

Both DVI High Definition inputs support HDMI, DVI, RGB and analogue Component (YPbPr) input via a DVI-I connector, at resolutions up to 4096x4096 pixels and supports 1080p (1920x1080) at 60 frames per second.

The VisionAV-HD captures all three video channels simultaneously and triple buffers them into onboard storage for tear free video, alongside an audio stream that can be selected from one of the HDMI or one of the analogue audio ports. This data can then be processed and copied using DMA transfers to the host system for display, storage or streaming.

For an application case study using this capture card, click below:

Datapath capture cards help record high quality Rich Media presentations


Key Qualities of the VisionAV-HD Capture Card:

  • Four lane PCIe lane bus, Net 1.6 GB/s total capture bandwidth
  • Triple channel PCI Express capture card
    • Two DVI-I capture channels
      • HDMI embedded audio capture and streaming
      • Low input to output capture latency
      • HDMI / DVI / TGB / YPbPr video capture
    • SD/ Composite capture channels
      • PAL, NTSC, SECAM up to 720x576 at 16 Bit colour
  • Direct DMA to graphics memory of third party graphics cards
  • All standard of the Vision capture card features
  • Driver support included within the Datapath unified Windows driver
  • Driver support included with the Datapath unified Linux driver (NOTE: Check Linux specific features with Sales)

Specification of the VisionAV-HD Capture Card:

Board Format PCI Express x4 half size plug-in card, 110mm x 170mm
Connectors (main board) 2 x DVI-I, 1 x RCA (female)
HDMI Capture Supports HDMI 1.3 to 225 MHz (inlcuding deep colour modes) HCDP is supported when used with Datapath graphics cards
HDMI audio can be selected as source for audio streaming
Incorporates TMDS equaliser to support up to 20m cables
DVI Capture Supports DVI 1.0 RGB 24 bit capture to 165 MHz
Incorporates TMDS equaliser to support up to 20m cables
VGA/ YPbPr Capture Triple ADCs sampling up to 170Msps. Full 4:4:4 sampling, 8bits per colour
5-wire, 4-wire or sync-on-green signal format
Composite Video Capture CCIR601 sampling, PAL, NTSC, SECAM formats automatically detected
Audio Capture Stereo Line-In/ Stereo balanced inputs with programmable gain (+/-12dB)
16 bit sampling at 44.1/ 48/ 96 kHz
Analogue stereo line-out for direct passthrough of selected input at up to 64kHz sampling, sourced from analogue input or HDMI channel
Video Capture Memory 256MB high bandwidth frame buffer supports triple buffering of HD and SD video
Local storage of complex scatter-gather tables for DMA engine (eliminates read overhead)
Video Processing Polyphase FIR scaling engine (7x5) for hardware downscaling and upscaling
Colour space conversion allows captured data to be transferred in any format:)
  • RGB 16 bit (5-5-5, 5-6-5), 24 bit (8-8-8) or 32 (8-8-8 alpha)
  • YUV 16 bit (4:2:2)
  • Mono: 8 bit
DMA Engine Direct DMA to physical or virtual memory buffers with full scatter-gather support
DMA bandwidth: up to 800 MB/s
16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters
Operating System Support Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows Server 2012, Windows 7, Windows 8 and Linux support (NOTE: Check Linux specific features with Sales)
Power Requirements Max current at 12V - 1A
Max current at 3.3V - 1A
Thermal dissipation - 15.5 W
Operating Temperature 0 to 35 °C/ 32 to 96 °F
Storage Temperature -20 to 70 °C/ -4 to 158 °F
Relative Humidity 5% to 90% non-condensing
Warranty 3 years

 

We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.

Models Available of the VisionAV-HD Capture Card:

ProductName/Order Code Description
VisionAV-HD 2 channel PLUS 1 channel SD full height capture card

* Adapters for other types of video connectors such as DVI/HDMI, DVI/VGA or DVI/Component are not included with the VisionAV-SDI but are available from Datapath, contact our sales team for details.

 

Your packing box should contain the following items:

  • A VisionAV-HD video capture card
  • Installation CD-ROM

 

VisionAV-HD video capture card accessories

ProductName/Order Code Description
DVI/ VGA DVI-A to VGA adapter
DVI/ HDMI DVI to HDMI adapter
DVI/ COMPONENT DVI to YPbPr adapter

All products are shipped with the latest software available, unless stated otherwise. Special requirements may be organised by contacting our Sales team.

Where to buy

Datapath has a large network of distributors and resellers across the World.

Datasheets

Download the datasheets for your Datapath products - current and past.

Current & Past Products »

Downloads

Download the latest software for your Datapath products.

Current Downloads »
Legacy Downloads »

Manuals

Download the manual for your Datapath products - current and past.

Current & Past Products »

Website Designed by Brookstone Creative Ltd.